Quick Way To Solve A Problem with Portable Refrigerator Error Codes

Introduction

Hi~ o( ̄▽ ̄)ブ~ Hello everyone, welcome to Bodegacooler FAQ Express. In this edition, we'll provide you with valuable insights and guidance on common panel prompts and operational troubleshooting for refrigerators. It's essential to understand these prompts to address any issues you may encounter during refrigerator usage effectively.

Common Panel Prompts and Operational Guidance for Refrigerators

Portable Refrigerators come equipped with user-friendly panels that display error codes to indicate specific problems or malfunctions. Understanding these error codes and following proper troubleshooting steps can help you resolve issues without unnecessary panic or confusion.

car fridge

Understanding Error Codes

Refrigerator error codes are alphanumeric indicators designed to assist users in identifying specific problems. Let's explore some common error codes and their corresponding solutions.

Displaying "F1"

If your 12v refrigerator's panel displays "F1," it typically indicates insufficient or unstable voltage/current. Here are the possible scenarios where "F1" may appear and the appropriate actions to take:

Q1: In the following four situations, "F1" is displayed:

  1. Fluctuating battery level indicator: Rapid fluctuations in the battery level indicator suggest unstable voltage. To address this, try replacing the power cord.
  2. Household power supply: If "F1" appears when using a household power supply, it may indicate a faulty power supply. Switch to a car power supply for testing purposes. If the refrigerator operates normally, consider replacing the household power supply.
  3. Car startup: When "F1" appears after turning off the car, it is a normal phenomenon. The "F1" code is displayed to protect the car battery. If the refrigerator continues operating normally after the car is turned off, it may affect the car battery. Ensure to monitor the battery's condition.
  4. Low voltage protection during car startup: If "F1" appears when the car is started, it indicates low voltage protection. To protect the battery, adjust the gear. Press and hold the settings button for 3 seconds until the panel gear flashes. Then, use the settings button to switch from "H" (high gear) to "M" (medium) or "L" (low).

Also learn: How to Set Portable Refrigerator Battery Protection's Mode?

battery protection mode

Displaying "F2"

Q1: If your refrigerator displays "F2," it can indicate a fan short circuit or a faulty module. Here's what you can do:

  1. Fan short circuit: Under the guidance of customer service, open the rear cover and disconnect the fan cable. If the refrigerator functions normally after disconnecting the fan cable, it indicates a fan malfunction. Contact customer service for fan replacement.
  2. Module malfunction: If "F2" persists even after disconnecting the fan cable, it may indicate a module malfunction. In this case, reach out to customer service to have the module replaced.

Displaying "F3"

If your refrigerator's panel shows "F3," it's time to check the compressor fan for malfunctions. Follow these steps:

  1. Frequent starts or unstable voltage: Reduce the voltage setting, shut down the refrigerator for an hour, and then restart it. Allowing the device to rest can resolve the issue in most cases.
  2. Using a household power supply: After shutting down the refrigerator for an hour, try using a household power supply. If the refrigerator still doesn't recover, it indicates a faulty compressor or module. Contact customer service for further assistance.

Displaying "F4"

Q1: If "F4" appears on the panel, it may be due to frequent starts. Here's what you can do:

  1. Restore factory settings: Shut down the refrigerator, restore the factory settings, and leave it off for an hour. Afterward, restart the refrigerator. If it returns to normal after one minute of operation, it indicates frequent starts. However, if the issue persists after restarting, it is recommended to return the refrigerator to the factory for repair.

Q2: For lithium battery-powered refrigerators displaying "F4":

If you have a lithium battery-powered car refrigerator, "F4" may appear due to low voltage. To restore normal functioning, charge the refrigerator normally and then restart it.

Displaying "F5"

Q1: When "F5" appears on the panel, it indicates frequent compressor starts and high pressure or temperature. Take the following steps:

  1. Check airflow: Verify if there is airflow from the refrigerator exhaust vent. In the power-off state, press and hold the settings button for 3 seconds until "E1" appears on the screen. Then, press and hold the plus and minus buttons for 3 seconds to restore the factory settings. Shut down the refrigerator for 20 minutes before turning it back on.

Friendly reminder: Maintain a distance of 15 cm between the refrigerator's ventilation port and the wall to ensure proper ventilation.

Displaying "F6"

Q1: If "F6" appears on the panel and the compressor and fan are not working, follow these steps:

  1. Restore factory settings: Shut down the refrigerator, restore the factory settings, and leave it off for an hour. Afterward, restart the device. If it still doesn't recover after restarting, it indicates a faulty compressor or module. Contact customer service and return it to the factory for repair.

Troubleshooting Tips for Panel Prompts

In addition to understanding the specific error codes, here are some general troubleshooting tips for handling panel prompts:

 "F1" Error Code

  • Check the power cord and replace it if necessary.
  • Ensure a stable power supply, preferably a car power supply.
  • Monitor the battery's condition when the refrigerator operates after the car is turned off.
  • Adjust the gear to protect the battery.

"F2" Error Code

  • Disconnect the fan cable to check for fan malfunctions.
  • Contact customer service for fan replacement or module malfunction.

 "F3" Error Code

  • Reduce voltage settings and allow the refrigerator to rest.
  • Test using a household power supply after an hour.
  • Contact customer service for compressor or module issues.

 "F4" Error Code

  • Restore factory settings, shut down for an hour, and restart.
  • Return it to the factory for repair if the issue persists.

"F5" Error Code

  • Check for proper airflow from the refrigerator exhaust vent.
  • Restore factory settings and allow a 20-minute shutdown before turning it back on.

"F6" Error Code

  • Restore factory settings, shut down for an hour, and restart.
  • Contact customer service and return it to the factory for repair.

Conclusion

In this Bodegacooler FAQ Express edition, we have explored common panel prompts and provided operational guidance for refrigerators. By understanding these error codes and following the troubleshooting steps, you can efficiently address any issues you encounter during refrigerator usage.

Remember to prioritize proper operation and maintenance to ensure optimal performance and longevity of your refrigerator.

You may also want to learn: Portable Fridge Frequently Asked Troubles and Solutions

9 comments

Donald

Donald

I have a K35 cooler/freezer. The F8 code displays continuously. Tried re-setting the unit but the code still comes on as soon as it powers up.

Thomas Chandler

Thomas Chandler

Instructions followed to switch from C. to F. Following the instructions didn’t work
How do I get from Celsius to Fahrenheit?

Angel

Angel

My fridge is displaying a temperature of 104 Fahrenheit. The outside temperature and the temperature in my truck has not been over 48 degrees Fahrenheit.
Why is it doing that? I placed a thermometer inside the fridge and it reads 38 degrees Fahrenheit.

Sat

Sat

Display went blank.
Power cord has voltage
Light on power pack is on

Robert

Robert

I have a Bull mini refrigerator showing an 808 error.

Nick demelo

Nick demelo

My coller is showing an f3 I unplugged it and plugged it back in after 2 h and still the same I also did this agen I’m the house

Stephanie McCormick

Stephanie McCormick

My cooler quit working after 6 months of use. Plug it in and nothing happens! Any ideas?

Jim

Jim

My Bodega Model T50 shows – - – on frig side when divider installed. So I can’t adjust temp. Freezes no issues on freezer side. Is there a fix for this?

Cindy Hardee

Cindy Hardee

We have gotten F1 quite a few times & now getting F5 codes too. How do I get a replacement chord & what is a car power chord because we only have this 1 power chord that plugs into the wall?

Leave a comment